HOME HELP FEEDBACK SUBSCRIPTIONS ARCHIVE SEARCH TABLE OF CONTENTS		QUICK SEARCH:   [advanced] Author: Keyword(s): Year:  Vol:  Page:

This Article Figures Only Full Text Free Full Text (PDF) Free Alert me when this article is cited Alert me if a correction is posted Services Related articles in JEQ Similar articles in this journal Similar articles in ISI Web of Science Similar articles in PubMed Alert me to new issues of the journal Download to citation manager Citing Articles Citing Articles via Google Scholar Google Scholar Articles by Mason, L. B. Articles by Anderson, M. A. Search for Related Content PubMed PubMed Citation Articles by Mason, L. B. Articles by Anderson, M. A. GeoRef GeoRef Citation Agricola Articles by Mason, L. B. Articles by Anderson, M. A. Related Collections Irrigation Colloids Nutrients Best Management Practices Phosphorus

TECHNICAL REPORTS

Surface Water Quality

Reducing Sediment and Phosphorus in Tributary Waters with Alum and Polyacrylamide

^a Department of Environmental Sciences, University of California, Riverside, CA 92521
^b Department of Chemical and Environmental Engineering, University of California, Riverside, CA 92521

^* Corresponding author (christopher.amrhein{at}ucr.edu)

Received for publication March 7, 2005. The Salton Sea is the largest inland water body in California, covering an area of 980 km². Inflow to the Salton Sea (1.6 km³ yr^–1) is predominately nutrient-rich agricultural wastewater, which has led to eutrophication. Because internal phosphorus release from the bottom sediments is comparatively low and external phosphorus loading to the Salton Sea is high, reduction of tributary phosphorus is expected to reduce algal blooms, increase dissolved oxygen, and reduce odors. Removing both dissolved phosphorus and phosphorus-laden sediment from agricultural drainage water (ADW) should decrease eutrophication. Both alum and polyacrylamide (PAM) are commonly used in wastewater treatment to remove phosphorus and sediment and were tested for use in tributary waters. Laboratory jar tests determined PAM effectiveness (2 mg L^–1) for turbidity reduction as cationic > anionic = nonionic. Although cationic PAM was the most effective at reducing turbidity at higher speeds, there was no observed difference between the neutral and anionic PAMs at velocity gradients of 18 to 45 s^–1. Alum (4 mg L^–1 Al) reduced turbidity in low energy systems (velocity gradients < 10 s^–1) by 95% and was necessary to reduce soluble phosphorus, which comprises 47 to 100% of the total P concentration in the tributaries. When PAM was added with alum, the anionic PAM became ineffective in aiding flocculation. The nonionic PAM (2 mg L^–1) + alum (4 mg L^–1 Al) is recommended to reduce suspended solids in higher energy systems and reduce soluble P by 93%.

Abbreviations: ADW, agricultural drainage water • PAM, polyacrylamide • P_P, particulate phosphorus • P_S, soluble phosphorus • P_T, total phosphorus • TMDL, total maximum daily load

Related articles in JEQ:

This Issue in Journal of Environmental Quality

JEQ 2005 34: v. [Full Text]