HOME HELP FEEDBACK SUBSCRIPTIONS ARCHIVE SEARCH TABLE OF CONTENTS		QUICK SEARCH:   [advanced] Author: Keyword(s): Year:  Vol:  Page:

This Article Full Text (PDF) Alert me when this article is cited Alert me if a correction is posted Services Similar articles in this journal Alert me to new issues of the journal Download to citation manager Citing Articles Citing Articles via Google Scholar Google Scholar Articles by Ham, J. M. Articles by Coyne, P. I. Search for Related Content PubMed Articles by Ham, J. M. Articles by Coyne, P. I. Agricola Articles by Ham, J. M. Articles by Coyne, P. I.

Technique for Measuring Air Flow and Carbon Dioxide Flux in Large, Open-Top Chambers

Dep. of Agronomy, Throckmorton Hall, Kansas State Univ., Manhattan, KS 66506;

P. I. Coyne

Fort Hays Exp. Stn., Hays, KS 67601.

^* Corresponding author.

ABSTRACT

Open-Top Chambers (OTCs) are commonly used to evaluate the effect of CO₂, O₃, and other trace gases on vegetation. A study was conducted to develop and test a new technique for measuring forced air flow and net CO₂ flux from OTCs. Experiments were performed with a 4.5-m diam. OTC that had a sealed floor and a specialized air delivery system. Air flow through the chamber was computed with the Bernoulli equation using measurements of the pressure differential between the air delivery ducts and the chamber interior. An independent measurement of air flow was made simultaneously to calibrate and verify the accuracy of the Bernoulli relationship. The CO₂ flux density was calculated as the product of chamber air flow and the difference in CO₂ concentration between the air entering and exhausting from the OTC (C_in - C_out). Accuracy of the system was evaluated by releasing CO₂ within the OTC at known rates to emulate respiration from the field surface. Data were collected with OTCs at ambient and elevated CO₂ (700 µmol mol^–1). Results showed that the Bernoulli equation, with a flow coefficient of 0.7, accurately measured air flow in the OTC to within ±5% regardless of flow rate and air duct geometry. Experiments in ambient OTCs showed that CO₂ flux density (µmol m^–2 s^–1), computed from 2-min averages of air flow and C_in - C_out, was typically within ±10% of actual flux, provided that the exit air velocity at the top of the OTC was greater than 0.6 m s^–1. Obtaining the same level of accuracy in CO₂-enriched OTCs, however, required a critical exit velocity near 1.2 m s^–1 to minimize the incursion of ambient air and prevent contamination of the exit gas sample. When flux data were integrated over time to estimate daily CO₂ flux (µmol m^–2 d^–1), actual and measured values agreed to within ±2% for both ambient and CO₂-enriched chambers, suggesting that accurate measurements of daily net C exchange are possible with this technique.

Contribution no. 93-229-J from the Kansas Agric. Exp. Stn., Manhattan, KS.

Received for publication January 19, 1993.